Automobile Paint Booths
Automobile paint booths are the cornerstone for car body shops, so making her at her highest performance is very significant.
Anona provides a universal spray booth for you, to fit with your requirements for painting work.
Ieutech Series Spray Booth
Key Features of Automobile Paint Booths
- The using size is 7x4x2.8M, larger than the old one, available for more kinds of cars.
- The plenum is ‘凸’ shape for protecting all wires from high temperature and the filtering area is 23M2,2M2 larger than other Chinese Spray Booth, help air to down faster.
- The entrance door and personnel door are made of steel tubes, and a little out of the surface of the entrance door, so the connecting area with the entrance door is smaller better air proof.
- The wall panel is 1M and covered male‐female sides by steel for making the cabin much stronger.
- The light system is 10 fixtures( 40 pcs of 36W light) as ceiling lights.
- We installed the light fixture on the wall panel with 30° angle instead of 45° , ensures air down smoothly.
- The generator frame is designed for saving energy and improving the function.
- We update the cabin and basement structure for easy installation.
- We install the control panel is installed in the front with elegant appearance, move conveniently to operation.
Main Specifications of Automobile Paint Booths
Inside Size
7,000×4,000×2,800 mm（L×W×H）
Outside Size
7,110×5,300×3,600 mm（L×W×H）
Basement
3 rows of grille and 2 rows of indented plate.
2 ramps with 520×2,000mm (W×L) size.
Entrance Door
3-leaf,size is 3,000×2,700mm(WxH).
Personnel Door
1 unit, size is 800×2,000mm(WxH),equipped with down-pressure emergency lock.
Wall Panels
1M wide per panel, 50mm EPS insulation and covered by double steel pre-painted plate, very strong.
Ceiling Light
10 fixtures, 4pcs of 36W Philips tube ( total 40pcs).
Heating System
G20 Riello Burner, max heat productivity is 200,000Kcal/h.
200KW heat exchange made of high efficiency 1.5mm stainless steel (1Gr18Ni9Ti, SUS304).
Intake Air Unit
1pc of outer roter double intake centrifugal fan (YDW5.6M), inner motor power is 7.5KW,air capacity is 20,000-22,000 m3/h, air speed is 0.3m/s.
Exhaust Air Unit
1pc of outer roter double intake centrifugal fan (YDW5.6M), inner motor power is 7.5KW,air capacity is 20,000-22,000 m3/h.Handed actuated for controlling the air capacity.
Exhaust Air Duct
Equipped with Exhaust Air Duct (4M straight duct, 1pc 90° elbow duct and 1pc 30 elbow° duct).
Filtering System
1) Pre-Filter 2) Ceiling filter 3)Floor Filter 4) Exhaust filter
Control System
Spray, heating spray, baking, baking time set, light switch, failure indicator, temperature controller,power switch, emergency stop, hours, pressure gauge.
